UniSeal ® - Solutions at Hand

Textured Synthetic Exam Gloves

PRINT PAGE

UniSeal® Nitrile Exam Gloves are made from 100% soft nitrile, a synthetic compound that's completely free of skin-irritating rubber proteins. These leading-edge gloves conform to your hands far more comfortably than other non-latex alternatives, such as vinyl. So you get a cool, dry, precise fit, with far less hand fatique. UniSeal® Nitrile Exam Gloves are also far more resistant to punctures and tears than either latex or vinyl and stand up to a variety of splashed chemicals, solvents, oils, and bases.

Type: Non-Sterile Examination Glove
Shape: Ambidextrous

   – Features
    • 5 mil thickness
    • Thin Wall nitrile technology
    • Puncture-resistant
    • Textured Finish for superior         grip
    • Alternative to rubber latex
   • Higher resistant to certain
    chemicals
   • Passes 200 Human Modified
    Draize Skin Allergy Test
    • Latex-Free
   • Comfortable fit reduces
    hand fatique
   • Bar-coded boxes and cartons
   • Dated Lot Codes for quality
    assurance and traceability
   • Safety Sealed Packaging
   • 100 Gloves/Box,
    10 Boxes/Case
   • 1 Case = 0.992 Cubic Feet

   – Dimensions/Sizes
   – Quality Standard
   – Manufacturing Standard
   – Physical Properties

Ingredients: 100% NBR Nitrile butadiene synthetic rubber formulation

Dimensions (all measurements in mm)
Sizes	Item #		Glove Length	Palm width +/-10mm	Thickness
Sizes		Powder-Free	Glove Length	Palm width +/-10mm	Cuff	Palm	Finger
XSmall		094-5	240	75	0.10	0.13	0.16
Small		094-6	245	85	0.10	0.13	0.16
Medium		094-7	245	95	0.10	0.13	0.16
Large		094-8	245	105	0.10	0.13	0.16
XLarge		094-9	245	115	0.10	0.13	0.16
XXLarge		094-0	245	125	0.10	0.13	0.16

Quality Standards

• Meets or exceeds the following standards: ASTM D3578-95 (USA), EN 455 (EEC), AS 40 (Australia), FDA, CE
• Quality sampled in accordance with MIL.STD 105D
• ISO 9002 Certified Manufacturing

Manufacturing Standards
• Brand new state-of-the-art manufacturing plant with computer-controller market-leading technology.
Defect	Inspection Level	AQL
Pinholes (FDA 1000ml watertight test)	G1	1.5
Visual Defects (major)	G1	2.5
Visual Defects (minor)	G1	4.0
Dimensions	S-2	4.0

Physical Properties
Before Aging:		Accelerated Aging: 7 days @ 70°C

UniSeal® Tensile Strength (Mpa) ASTM Minimum Requirement

Physical Properties
Before Aging:		Accelerated Aging: 7 days @ 70°C

UniSeal® Ultimate Elongation ASTM Minimum Requirement

PRINT PAGE